SUNACE
Australia · Leading through quality
Sun Ace Australia Pty Ltd
32-38 Remington Drive, Dandenong South VIC 3175
ABN 52 006 388 102 · +61 3 9702 9444 · sunace@sunace.com.au
Certificate of Analysis
COA-26-0439
Product
SAK-CZP30
SAK-CZP 30 · Ca/Zn one pack, pressure pipe
One-pack PVC stabilisers
Batch
B26-0439
- Manufactured
- 23 Jul 2026
- Best before
- 22 Jul 2028
- Quantity made
- 11,916 kg
- Works order
- WO-2026-0445
One-pack stabiliser release
QP-ONEPACK
Run at the end of manufacture, before the goods can be receipted into finished goods.
Tested against
SA-CZP30-A for SAK-CZP30, then IPX-CZP30-04 for Iplex Pipelines Australia Pty Ltd · 4 of 8 tests held tighter than QP-ONEPACK.
SA-CZP30-A: Pressure pipe. The grade is held tighter than the one-pack plan on colour and on initial fusion.
IPX-CZP30-04: Iplex supply agreement, clause 7. Tighter again on moisture and colour, and a bulk density window they extrude to.
This batch went to 2 customers. Issue the certificate for Iplex Pipelines Australia Pty Ltd · Vinidex Pty Ltd
| Test | Specification | Result | Off target | Outcome |
|---|---|---|---|---|
| Yield | 97.50 to 100.00 % | 99.30 % | — | Pass |
| Peak temperature | 128.0 to 142.0 °C | 135.4 °C | — | Pass |
| Fusion time | 54.0 s ±2% Grade spec SA-CZP30-A · plan says 54.0 s ±3% | 53.0 s | -1.85% | Pass |
| Torque, peak | 42.0 Nm ±3% | 41.6 Nm | -0.95% | Pass |
| Colour, initial ΔE | 0.00 to 1.80 ΔE Customer spec IPX-CZP30-04 · plan says 0.00 to 3.50 ΔE | 1.42 ΔE | — | Pass |
| Bulk density | 300 to 350 g/L Customer spec IPX-CZP30-04 · plan says 260 to 400 g/L | 322 g/L | — | Pass |
| Moisture | 0.00 to 0.90 % Customer spec IPX-CZP30-04 · plan says 0.00 to 1.50 % | 0.51 % | — | Pass |
| Texture, visual | 1 to 1 pass | Conforms | — | Pass |
Part batches supplied to Iplex Pipelines Australia Pty Ltd
- SO-26-1181 30 Jul 2026 · 4,500 kg · 8 palletsB26-0439-P10B26-0439-P11B26-0439-P12B26-0439-P13B26-0439-P14B26-0439-P15B26-0439-P16B26-0439-P17
24 pallets came off this run. Each carries its own label, so a claim can be answered against the pallets that were delivered rather than the whole batch.
Also reported on this certificate
| Black specks | not more than 12 per kg | 3 per kg | Pass |
| Pour density | reported | 284 g/L | reported |
Recorded on the retained sample at release. Reported because pipe extrusion variant asks for it, and not a criterion the batch was released on.
Against the customer agreements on this grade
- Meets Iplex Pipelines Australia Pty Ltd IPX-CZP30-04
A batch can be inside the published grade and outside one customer's agreement. That is not a failed batch, it is a batch that goes somewhere else.
Released by
Vinh Le
23 Jul 2026 at 4:41pm
Made on BL-01 by Tui Faletau
Despatched against
- Iplex Pipelines Australia Pty Ltd SO-26-1181 · 4,500 kg
- Vinidex Pty Ltd SO-26-1176 · 4,236 kg
- The goods described were manufactured under a quality system certified to ISO 9001:2015.
- Black speck count is reported on the retained sample and is not a release criterion.
- A retained sample of this batch is held for the shelf life of the product.
Sun Ace Australia Pty Ltd, ABN 52 006 388 102. Results of testing carried out on the batch named above under quality plan QP-ONEPACK. Results relate only to the batch tested. COA-PIPE