B26-0353
Pass Main StoreACE-ZNS10, ACE-ZNS 10 · zinc stearate, PVC & rubber grade. 7,873 kg made on 25 Jul 2026 against WO-2026-0353, 3,159 kg still on the floor, best before 24 Jul 2028.
The run, pallet by pallet
16 pallets off WO-2026-0353. A hold is recorded against the pallet, so the rest of the run stays sellable.
| # | Pallet label | kg | Status | Location | Note | |
|---|---|---|---|---|---|---|
| 1 | B26-0353-P01 | 500 | Despatched | Main Store | ||
| 2 | B26-0353-P02 | 500 | Despatched | Main Store | ||
| 3 | B26-0353-P03 | 500 | Despatched | Main Store | ||
| 4 | B26-0353-P04 | 500 | Despatched | Main Store | ||
| 5 | B26-0353-P05 | 500 | Despatched | Main Store | ||
| 6 | B26-0353-P06 | 500 | Despatched | Main Store | ||
| 7 | B26-0353-P07 | 500 | Despatched | Main Store | ||
| 8 | B26-0353-P08 | 500 | Despatched | Main Store | ||
| 9 | B26-0353-P09 | 500 | Despatched | Main Store | ||
| 10 | B26-0353-P10 | 500 | Released | Main Store | ||
| 11 | B26-0353-P11 | 500 | Released | Main Store | ||
| 12 | B26-0353-P12 | 500 | Released | Main Store | ||
| 13 | B26-0353-P13 | 500 | Released | Main Store | ||
| 14 | B26-0353-P14 | 500 | Released | Main Store | ||
| 15 | B26-0353-P15 | 500 | Released | Main Store | ||
| 16 | B26-0353-P16 | 373 | Released | Main Store |
← Backward trace
Every raw material lot consumed into this batch, and the supplier it came from. If a supplier recalls a lot, this is the list of batches it touched.
| Raw material | Supplier lot | Supplier | kg |
|---|---|---|---|
| RM-1010 Stearic acid, triple pressed, vegetable | KLK-2407941 | KLK OLEO (Malaysia) Sdn Bhd | 6,096 |
| RM-2020 Zinc oxide, French process, 99.7% | ZIB-2507503 | Zibo Xiangrun Chemical Co. Ltd | 1,808 |
| RM-6040 Precipitated silica, anti-caking | SIB-2405672 | Sibelco Australia Ltd | 96 |
| Charged into the batch | 8,000 kg | ||
Forward trace →
Every despatch this batch went out on. If a customer raises a complaint against a batch number, this is who else received it.
Nothing shipped yet. The whole batch is still on the floor.
Release record · Metallic stearate release
Tested 26 Jul 2026 by Priya Raman. Precipitated and fused stearates. Metal content and sieve residue decide the grade.
SUNACE
Australia · Leading through quality
Sun Ace Australia Pty Ltd
32-38 Remington Drive, Dandenong South VIC 3175
ABN 52 006 388 102 · +61 3 9702 9444 · sunace@sunace.com.au
Certificate of analysis
B26-0353
- Grade
- ACE-ZNS10
- Manufactured
- 25 Jul 2026
- Best before
- 24 Jul 2028
- Quantity
- 7,873 kg
Sun Ace Australia Pty Ltd certifies that batch B26-0353 of ACE-ZNS10, ACE-ZNS 10 · zinc stearate, PVC & rubber grade, was manufactured at Dandenong South under our ISO 9001:2015 quality system and tested against quality plan QP-STEARATE (Metallic stearate release) with the following results.
| Test | Result | Specification | Method |
|---|---|---|---|
| Yield | 99.20 % | 97.5-100 % | SA-QC-YIEL |
| Peak temperature | 133.1 °C | 128-142 °C | SA-QC-TEMP |
| Metal content | 6.86 % | 6.2-7.4 % | SA-QC-META |
| Moisture | 0.77 % | 0-1.5 % | SA-QC-MOIS |
| Bulk density | 312 g/L | 260-400 g/L | SA-QC-BULK |
| Sieve residue 75 µm | 0.08 % | 0-0.5 % | SA-QC-SIEV |
| Melting point | 154.4 °C | 145-165 °C | SA-QC-MP |
| Free fatty acid | 0.66 % | 0-1.2 % | SA-QC-FFA |
Metallic stearate grades are produced from vegetable-based fatty acids and are declared free of animal substances and BSE free. A retained sample is held for 24 months from the date of manufacture. Handle in accordance with the current safety data sheet.
Released by Priya Raman
Date