B26-0183
Pass Main StoreACE-LIS10, ACE-LIS 10 · lithium stearate, grease & lubricant. 1,463 kg made on 17 Mar 2026 against WO-2026-0183, 440 kg still on the floor, best before 16 Mar 2028.
The run, pallet by pallet
2 pallets off WO-2026-0183. A hold is recorded against the pallet, so the rest of the run stays sellable.
| # | Pallet label | kg | Status | Location | Note | |
|---|---|---|---|---|---|---|
| 1 | B26-0183-P01 | 1,000 | Despatched | Main Store | ||
| 2 | B26-0183-P02 | 463 | Released | Main Store |
← Backward trace
Every raw material lot consumed into this batch, and the supplier it came from. If a supplier recalls a lot, this is the list of batches it touched.
| Raw material | Supplier lot | Supplier | kg |
|---|---|---|---|
| RM-1024 12-hydroxystearic acid | FAC-2411857 | Faci Asia Pacific Pte Ltd | 1,113 |
| RM-2060 Lithium hydroxide monohydrate | IMC-2604797 | IMCD Australia Ltd | 162 |
| RM-1010 Stearic acid, triple pressed, vegetable | KLK-2502733 | KLK OLEO (Malaysia) Sdn Bhd | 198 |
| RM-6040 Precipitated silica, anti-caking | SIB-2404262 | Sibelco Australia Ltd | 18 |
| Charged into the batch | 1,491 kg | ||
Forward trace →
Every despatch this batch went out on. If a customer raises a complaint against a batch number, this is who else received it.
| Sales order | Customer | Despatched | kg |
|---|---|---|---|
| SO-00993 | Gale Pacific Ltd Braeside VIC | 07 May 2026 | 864 |
| Despatched · remaining | 864 · 440 kg | ||
Release record · Metallic stearate release
Tested 18 Mar 2026 by Priya Raman. Precipitated and fused stearates. Metal content and sieve residue decide the grade.
SUNACE
Australia · Leading through quality
Sun Ace Australia Pty Ltd
32-38 Remington Drive, Dandenong South VIC 3175
ABN 52 006 388 102 · +61 3 9702 9444 · sunace@sunace.com.au
Certificate of analysis
B26-0183
- Grade
- ACE-LIS10
- Manufactured
- 17 Mar 2026
- Best before
- 16 Mar 2028
- Quantity
- 1,463 kg
Sun Ace Australia Pty Ltd certifies that batch B26-0183 of ACE-LIS10, ACE-LIS 10 · lithium stearate, grease & lubricant, was manufactured at Dandenong South under our ISO 9001:2015 quality system and tested against quality plan QP-STEARATE (Metallic stearate release) with the following results.
| Test | Result | Specification | Method |
|---|---|---|---|
| Yield | 99.35 % | 97.5-100 % | SA-QC-YIEL |
| Peak temperature | 133.6 °C | 128-142 °C | SA-QC-TEMP |
| Metal content | 6.93 % | 6.2-7.4 % | SA-QC-META |
| Moisture | 0.52 % | 0-1.5 % | SA-QC-MOIS |
| Bulk density | 342 g/L | 260-400 g/L | SA-QC-BULK |
| Sieve residue 75 µm | 0.16 % | 0-0.5 % | SA-QC-SIEV |
| Melting point | 156.2 °C | 145-165 °C | SA-QC-MP |
| Free fatty acid | 0.49 % | 0-1.2 % | SA-QC-FFA |
Metallic stearate grades are produced from vegetable-based fatty acids and are declared free of animal substances and BSE free. A retained sample is held for 24 months from the date of manufacture. Handle in accordance with the current safety data sheet.
Released by Priya Raman
Date