B26-0241
Pass Main StoreACE-MGS10, ACE-MGS 10 · magnesium stearate, technical grade. 2,938 kg made on 05 Apr 2026 against WO-2026-0241, 1,223 kg still on the floor, best before 04 Apr 2028.
The run, pallet by pallet
3 pallets off WO-2026-0241. A hold is recorded against the pallet, so the rest of the run stays sellable.
| # | Pallet label | kg | Status | Location | Note | |
|---|---|---|---|---|---|---|
| 1 | B26-0241-P01 | 1,000 | Despatched | Main Store | ||
| 2 | B26-0241-P02 | 1,000 | Released | Main Store | ||
| 3 | B26-0241-P03 | 938 | Released | Main Store |
← Backward trace
Every raw material lot consumed into this batch, and the supplier it came from. If a supplier recalls a lot, this is the list of batches it touched.
| Raw material | Supplier lot | Supplier | kg |
|---|---|---|---|
| RM-1010 Stearic acid, triple pressed, vegetable | KLK-2410637 | KLK OLEO (Malaysia) Sdn Bhd | 2,418 |
| RM-2030 Magnesium oxide, light, technical | SIN-2511918 | Sinochem Plastics Co. Ltd | 546 |
| RM-6040 Precipitated silica, anti-caking | SIB-2402297 | Sibelco Australia Ltd | 36 |
| Charged into the batch | 3,000 kg | ||
Forward trace →
Every despatch this batch went out on. If a customer raises a complaint against a batch number, this is who else received it.
| Sales order | Customer | Despatched | kg |
|---|---|---|---|
| SO-00997 | Ridley Corporation Ltd Melbourne VIC | 28 May 2026 | 1,416 |
| Despatched · remaining | 1,416 · 1,223 kg | ||
Release record · Metallic stearate release
Tested 06 Apr 2026 by Priya Raman. Precipitated and fused stearates. Metal content and sieve residue decide the grade.
SUNACE
Australia · Leading through quality
Sun Ace Australia Pty Ltd
32-38 Remington Drive, Dandenong South VIC 3175
ABN 52 006 388 102 · +61 3 9702 9444 · sunace@sunace.com.au
Certificate of analysis
B26-0241
- Grade
- ACE-MGS10
- Manufactured
- 05 Apr 2026
- Best before
- 04 Apr 2028
- Quantity
- 2,938 kg
Sun Ace Australia Pty Ltd certifies that batch B26-0241 of ACE-MGS10, ACE-MGS 10 · magnesium stearate, technical grade, was manufactured at Dandenong South under our ISO 9001:2015 quality system and tested against quality plan QP-STEARATE (Metallic stearate release) with the following results.
| Test | Result | Specification | Method |
|---|---|---|---|
| Yield | 99.57 % | 97.5-100 % | SA-QC-YIEL |
| Peak temperature | 133.2 °C | 128-142 °C | SA-QC-TEMP |
| Metal content | 6.61 % | 6.2-7.4 % | SA-QC-META |
| Moisture | 0.58 % | 0-1.5 % | SA-QC-MOIS |
| Bulk density | 333 g/L | 260-400 g/L | SA-QC-BULK |
| Sieve residue 75 µm | 0.10 % | 0-0.5 % | SA-QC-SIEV |
| Melting point | 153.2 °C | 145-165 °C | SA-QC-MP |
| Free fatty acid | 0.52 % | 0-1.2 % | SA-QC-FFA |
Metallic stearate grades are produced from vegetable-based fatty acids and are declared free of animal substances and BSE free. A retained sample is held for 24 months from the date of manufacture. Handle in accordance with the current safety data sheet.
Released by Priya Raman
Date