B26-0218

Pass Main Store

ACE-CAS10, ACE-CAS 10 · calcium stearate, PVC grade. 9,759 kg made on 02 Apr 2026 against WO-2026-0218, 2,226 kg still on the floor, best before 01 Apr 2028.

← Backward trace

Every raw material lot consumed into this batch, and the supplier it came from. If a supplier recalls a lot, this is the list of batches it touched.

Raw material	Supplier lot	Supplier	kg
RM-1010 Stearic acid, triple pressed, vegetable	KLK-2406188	KLK OLEO (Malaysia) Sdn Bhd	8,120
RM-2010 Calcium hydroxide, technical, low iron	RED-2407531	Redox Pty Ltd	1,680
RM-6040 Precipitated silica, anti-caking	SIB-2512128	Sibelco Australia Ltd	140
RM-8050 Process water treatment, softener salt	RED-2604256	Redox Pty Ltd	80
Charged into the batch			10,020 kg

Forward trace →

Every despatch this batch went out on. If a customer raises a complaint against a batch number, this is who else received it.

Sales order	Customer	Despatched	kg
SO-01005	Cabot Australasia Pty Ltd Altona VIC	07 Jun 2026	6,299
SO-00746	Cadel Foundry Supplies Pty Ltd Dandenong South VIC	13 Sep 2025	530
SO-00832	Prysmian Australia Pty Ltd Liverpool NSW	20 Dec 2025	544
Despatched · remaining			7,373 · 2,226 kg

Release record · Metallic stearate release

Tested 03 Apr 2026 by Karen Doust. Precipitated and fused stearates. Metal content and sieve residue decide the grade.

Pass

Yield 99.65 % 97.5-100

Peak temperature 136.7 °C 128-142

Metal content 6.92 % 6.2-7.4

Moisture 0.80 % 0-1.5

Bulk density 340 g/L 260-400

Sieve residue 75 µm 0.15 % 0-0.5

Melting point 155.4 °C 145-165

Free fatty acid 0.43 % 0-1.2

SUNACE

Australia · Leading through quality

Sun Ace Australia Pty Ltd
32-38 Remington Drive, Dandenong South VIC 3175
ABN 52 006 388 102 · +61 3 9702 9444 · sunace@sunace.com.au

Certificate of analysis

B26-0218

Grade: ACE-CAS10
Manufactured: 02 Apr 2026
Best before: 01 Apr 2028
Quantity: 9,759 kg

Sun Ace Australia Pty Ltd certifies that batch B26-0218 of ACE-CAS10, ACE-CAS 10 · calcium stearate, PVC grade, was manufactured at Dandenong South under our ISO 9001:2015 quality system and tested against quality plan QP-STEARATE (Metallic stearate release) with the following results.

Test	Result	Specification	Method
Yield	99.65 %	97.5-100 %	SA-QC-YIEL
Peak temperature	136.7 °C	128-142 °C	SA-QC-TEMP
Metal content	6.92 %	6.2-7.4 %	SA-QC-META
Moisture	0.80 %	0-1.5 %	SA-QC-MOIS
Bulk density	340 g/L	260-400 g/L	SA-QC-BULK
Sieve residue 75 µm	0.15 %	0-0.5 %	SA-QC-SIEV
Melting point	155.4 °C	145-165 °C	SA-QC-MP
Free fatty acid	0.43 %	0-1.2 %	SA-QC-FFA

Metallic stearate grades are produced from vegetable-based fatty acids and are declared free of animal substances and BSE free. A retained sample is held for 24 months from the date of manufacture. Handle in accordance with the current safety data sheet.

Released by Karen Doust

Date